Info about event

Time

Tuesday 13 January 2015, at 10:20 - 11:00

Add to calendar

Location

AUD I (1514-213), Dept. of Chemistry, Langelandsgade 140, 8000 Aarhus C

Organizer

Associate Professor Alexander Zelikin, Department of Chemistry, University of Aarhus

By Trine Møller Hansen

Professor and Director Harm-Anton Klok, Polymers Laboratory (Institute of Materials and Institute of Chemical Sciences and Engineering), Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland

Engineering Interfaces using Controlled Radical Polymerization

Thin polymer coatings are of great importance to control the interactions of synthetic materials with other materials (lubrication, wear), the environment (corrosion) as well as biology (marine antifouling). Modern polymer science offers unprecedented opportunities to chemically engineer the properties of surfaces and interfaces. This presentation will discuss three aspects. The first part of the presentation will introduce modern controlled/”living” radical polymerization techniques and “polymer brushes” (chain-end tethered monomolecular assemblies of densely grafted polymer chains) and present the scope and possibilities of these approaches to chemically modify surfaces and interfaces. The second part of the presentation will address the need for accurate surface chemical characterization and the challenges related to the precise determination of the localization and distribution of functional groups in thin polymer films. The presentation will end with several brief showcases that illustrate the use of modern polymer science tools to develop ultrathin polymer films that possess sensory properties, which can be used to control fluid flow, to template the controlled growth of metallic or non-metallic inorganic films on complex, 3D structured substrates as well as to guide and control cell adhesion..

Selected References

(1) R. Barbey, L. Lavanant, D. Paripovic, N. Schüwer, C. Sugnaux, S. Tugulu, H.-A. Klok, Polymer brushes via surface-initiated controlled radical polymerization: synthesis, characterization, properties and applications, Chem. Rev. 2009, 109, 5437;
(2) N. Schüwer, T. Geue, J. P. Hinestrosa, H.-A. Klok, Neutron reflectivity study on the postpolymerization modification of poly(2-hydroxyethyl methacrylate) brushes, Macromolecules 2011, 44, 6868;
(3) R. Barbey, V. Laporte, S. Alnabulsi, H.-A. Klok, Postpolymerization modification of poly(glycidyl methacrylate) brushes: An XPS depth-profiling study, Macromolecules 2013, 46, 6151;
(4) N. Schüwer, H.-A. Klok, A potassium-selective quartz crystal microbalance sensor based on crown-ether functionalized polymer brushes, Adv. Mater. 2010, 22, 3251;
(5) C. Sugnaux, L. Lavanant, H.-A. Klok, Aqueous fabrication of pH-gated, polymer-brush-modified alumina hybrid membranes, Langmuir 2013, 29, 7325.